Paintball guns are the devices that a person uses to shoot down his opponent with ease. These guns can throw paintball pellets at a high-velocity rate and they do it with pressure release mechanism offered by the gases used in the paintball tanks already.
That being said, many paintball players face this issue of refilling the tanks they have got with the paintball guns. That’s why many of them ask the question that how to fill a CO2 paintball tank?
The question requires to be answered in details and that’s why I am here with a detailed guide on how you can refill a CO2 paintball tank easily. So, before you start considering, I will warn you that the process needs to be understood with opened eyes.
So, let’s start the topic with some basic refilling tank types and then the complete process of filling CO2 paintball tank:
Types of Paintball Tanks Available:
Some important types of tanks that you need to know are as follows:
The most common paintball tanks are CO2 tanks. They are either filled with the liquid or gaseous state. If you refill a tank with liquid carbon dioxide, then it will revert to the gaseous state especially when you are using it to throw the paintball pellets.
Compressed Air Tanks:
The very next type of filling tanks are the ones that have been filled with compressed air. They are also called as HPA [high-pressure tanks] and are normally filled with oxygen.
Such filling tanks work same as that of a CO2 tank especially when they are filled with filtered oxygen. The compressed gas offers great pressure and thus becomes an ideal choice to enhance the overall velocity of the paintball gun you are using.
As from the name, it indicates that these filling tanks are filled with compressed nitrogen gas. They are thus used for different purposes. However, one thing to keep in mind is that they are not the Nitrous Oxide tanks usually used in cars. The ones used in cars have completely different formulae. While the tanks that are discussed here are filled with pure compressed nitrogen only.
So, those were all the paintball tanks types that you needed to know. We’ll be going towards the main process of filling the CO2 tank using a compressor now.
Let’s have a look without any further ado:
How to Refill a CO2 Paintball Tank with Compressed Air?
Follow these steps to refill the CO2 tank with safety and protection:
1. Checking the Genuineness of the Tank:
Before you start the refilling process, you must take all the safety measurements. One of the most important measures you can take in this regard is to check out the genuineness of the tank you are about to fill.
So, in this scenario, you need to check out the hydro-testing print available on side of the tank. Keep in mind that a CO2 tank based in the U.S goes through hydro-testing within 5 years. Hence, if the tank is already not certified with this test, then this should be an alarming situation for you.
Therefore, make sure that you check out the genuineness of the tank before you start refilling it to keep yourself away from injury.
2. PSI Rating of the Tank Matters:
PSI rating is usually imprinted on the outside of the tank’s canister that you are about to fill. The long imprinted serial number has got initial letters along with the four numbers used for PSI ratings.
You need to check out this rating before filling the tank. The most commonly used CO2 tanks either have an 1800 PSI ratings or 3000 PSI ratings. Now it depends upon the type of tank you get for the paintball gun. In either case, it is always better to fill the tank a bit low than that of the PSI ratings.
Why? To play the safe side. It’s just that simple. Overfilling can cause risk of explosion and might hurt you. Therefore, it is necessary that you better check the PSI rating of the tank first before starting the refilling process.
3. Using the Compatible Adapter for Filling:
This is necessary to understand that every CO2 has different fittings to make sure that they can be refilled without any leakage and wit full protection. That’s the main reason, you need to select a compatible adapter according to the fitting threader of your tank.
In this scenario, you can check out the local hardware stores to find the suitable adapter that can fit the CO2 tank you’ve got. Either that or you can simply visit Amaon.com to find the compatible filling adapter for your tank at an affordable price.
No matter what decision you make, you should never think of filling the tank without applying the right filling adapter to it or else you have to bear the consequences.
4. Emptying the Tank:
The next step that you should follow in refilling the tank will be to make it free from the air that is trapped inside the tank already. This way, you will be able to refill it up to its capacity and it won’t impact the velocity of the pellets you are shooting via gun.
So, for this purpose, first of all, you need to attach the adapter to the tank and hook it up with the hose of air compressor. But, don’t just connect the compressor and keep the valve open to make sure that the tank is emptied.
5. Using a High Air Pressure Compressor:
Filling the CO2 is not as easy as it looks. The last step will be to use a high air pressure compressor for refilling processor. Keep in mind that refilling is not possible with a hand pump and you will need an air compressor machine that gives you the right PSI ratings and can deliver air at the given rate as well.
This way, you will be able to refill the CO2 tank for your paintball gun easily.
Some Last Words:
Before you do anything, it is necessary to follow all the safety instructions or else the explosion of the tank may cause issues for you. If you are afraid of refilling the tank on your own, it is better to take it to a paintball shop where the vendor will do the task for you. Just keep in mind that your health matters before you start the refilling process.